Wednesday, 30 October 2019

Week 8 - disaster! Or was it....

Lots to report this week.  I should say that I created this blog mostly for myself at the suggestion of a cape Dory owner who said I should list all of the work I have done so that when I get depressed about the never ending boat work can look back and see all I did. 

So, on Monday I decided to leave the excellent Salt Ponds Marina for Portsmouth's Tidewater Marina....a big marina on the icw and next to Portsmouth's olde Town. 

I never made it....

As I left the salt ponds I immediately noticed the huge 3-4 ft swells slamming my boat as I entered the Bay.  It was rough.  I persevered and made it all the way to the Norfolk shipping channel....I thought I'd get some cover here but then the wind changed directly East and the rough seas continued.  Then it happened....my alarm went off and the engine was smoking a bit from overheating...Fuck!  I shut the engine off and tried to sail through the channel with my jib sail...too rough!  Then I heard it .....BOOM BOOM BOOM BOOM BOOM....I looked behind me and there was a container ship on my ass.....then I heard a foreign voice on vhf channel 16 telling me to clear the channel.....I stood up and told him to Fuck Off (and shot the finger at him)...I was powerless and he needed to move his ass around me.  He did....and sent enough wake to capsize my boat.  Asshole!
So I called the coast guard who sent the Hampton volunteer fire Dept to me to tow me in.  They were nice, but inexperienced.  I had to come up to the bow to cleat them to my boat.  During the tow they bent my anchor cotter pin frame so much that the anchor fell off the deck.  I grabbed it with my right hand while holding on to the boat with my left.  I gashed the hell out of a finger but managed to pull my anchor up on deck.  Then the tow rope busted my  deck light. 
Then as we arrived at the closest marina (old point Comfort) they cut a corner too close and my stern stanchion didn't clear the entrance and they bent the shit out of it (while looking right at it). 
The thing is...they were volunteers providing a free service...I wanted to beat the crap out of them but I really couldn't...it was free....I was happy to be out of the channel.  I just said thanks and let them go. 
Their captain had the best line of the day...he said "I saw you bouncing around out there.....if you didn't vomit during that (I didnt) you are never going to."

So, I found the problem that caused the engine to overheat.  I have ordered parts that will be here in 2 days.  The problem was mentioned in my survey done last Feb. But I forgot about it (can I win 2 Darwin awards?). I'll do the repairs and be off on Monday if all goes well.

This event caused me to ponder if I'm doing the right thing...if this is too much for me to handle....if I am too old for this.  But after I was docked at the marina and given a double shot of tequila by one boater and comforted and reassured by 3 other boaters I realized.....how much fun I just had.  This is what I wanted.  To test myself physically and mentally.  To do things I have never done before and learn about boating and sailing and be with like minded people.  That tequila shot represented brotherhood, respect and acceptance.  I am more determined than ever to move forward and do this...because at the end of the day....the whole afternoon was a blast and I don't have to be anywhere at a certain time. 

I am happy to report that I have fixed the anchor and deck light and ordered parts to fix the engine.  I'll find a fix to the stern stanchion.....I don't have to fix it today.  Instead, I went to harbor freight tool store ...I could shop there for a week.  Bought boat tools and then went to LaParilla and drank 4 margaritas.   Life is good.....

Sunday, 20 October 2019

Week 7 - Rain, "effluent", and leaving early

So I went to Texas for my mother's funeral service and got back to Norfolk yesterday.  It has been raining ever since I arrived.  In fact it is projected to rain 8 of the next 10 days here and it is starting to get a bit chilly at night.  This of course means that it is time to get my rear end out of here and go South.

The following items MUST be done before I can leave:
1.  Topside of boat needs to be cleaned and waxed with my Delaware registration put on the boat.
2.  Transom needs to have "Sandpiper" scraped off, cleaned, waxed and "VLee" decal put on. (1 and 2 are required by uscg).
3. Vberth starboard Port needs to be rebed.
4.  Holding tank needs a pump out and I am never using it again - this requires an explanation...

I've used my jabsco toilet on board about 6 or 7 times in the past month.  I checked the tank and noticed that it didn't appear that anything was in it.  I wasn't sure why. Without going into detail air pressure was keeping the waste from going into the tank so I opened the deck fitting and drilled a hole at the top of the tank (stupid! I deserve a Darwin award for that).  So I go back and check and the tank is now completely full...with a smell that cannot be described.  I am not going to deal with pump outs at marinas.  It's too much trouble. So I will pump this out tomorrow at the fuel dock, run vinegar through the lines, flush biohazard freshener into the tank and never use it again. 
Instead, I will put a plastic bag in the bowl, tie the bag, and then dump it in the trash.  This is easier to deal with. 
Once I am 3 miles away from the coast I can legally pump the poop into the ocean, so the bag process is only for coastal sailing. 
Come to think of it I haven't seen anyone do a pump out at this marina....they must have huge tanks.
I also bought one of those kids pool toys that is the long foam pole...made a toilet cushion out of it....if I have to use a bag I can at least be comfortable.

Anyway.....I'm going to do all of this on the 2 good weather days we have and then I am leaving.  I am taking the ICW
to Beaufort.  I am going to cut it into 4 day trips....more about that next post....
P.S. previous owners left me a marine grade heater...works great!

Thursday, 10 October 2019

Week 6 - sailing, sons visit, preparing for the first legs of my journey

During the past 2 weeks a lot has happened.  My oldest son came to visit for a week and we had a great time.  He picked up sailing terminology really fast.  Then came the sad news that my boat's namesake (my mother) passed away....I don't even have her name on the boat yet, but I'll do it soon.

As far as the VLee is concerned, I'm happy to report that all of the tasks I set out to do in my last post have been done except I didn't soak the main sheets....it can wait.  But with a boat there is always more to do and we finally had some rain.  I rebed the stanchion that was mentioned in my survey as  problem before it rained and it worked great - no leaks.  But i discovered that most of my ports (windows) have small leaks inside due to old gaskets.  So, tomorrow I replace the gaskets (shouldn't be a hard job).  One of the ports may need to be rebed from the outside and the forward hatch is leaking from the outside so it needs some attention too.  All boats leak (this was the discussion of the day the following day here at the marina). But, I am determined to have a dry cabin. 

Today I filled up the water tank and my new 7 gallon water cans and attached them to the bow of the boat. Tomorrow I fuel up with Diesel and finish the gasket project.  Then, on Saturday I leave the friendly people of Deltaville and begin moving South.  I hope to be in Norfolk by Monday. Winds are predicted to be light and out of the south for most of the journey which means I'll be beating directly into them but as light as they are it won't be an issue.

Two upcoming projects:
build a piece that will fill the V berth so that the entire berth is one big bed.  So right now it looks like an upside down "V" and I want it to look like a triangle. Not difficult, just need to make time.

Connect my vhf radio AIS capability to my chart plotter so that my plotter sees where other boats are and what their path is.  I have this capability on the radio but having it on the plotter would be awesome.

On a final note, I have to say that I really like the State of Virginia.  Wonderful food, nice friendly people, thick forests.....nice place. 

Thursday, 26 September 2019

Week 4 - projects and trial and error

Yesterday I single handed for the first time (that sounds so dirty). I got off to a rough start out of the slip, I made an exit plan, untied the lines in the proper order and then got back in the cockpit to go in reverse. But the current and wind pushed the bow of my boat to starboard and I came within 2 inches of hitting (hard!) a replica of a famous fishing boat from the 1920s (list price $89,000). But I pushed it away with my foot at the last second and my heart stopped beating while my anchor and bow sprit passed by the antique glass accents and brass trim.
I quickly got VLee out into the open area and turned her around and got out of the marina.  In the future I am going to drop anchor away from marinas a lot more than I do now.

Once I was in open water everything was fine. Wind was light. I practiced leaving the cockpit and hoisting the mainsail by myself...a bit scary but I did it.    The return to the marina went much better.  I had a docking plan and for the most part it worked - also my friend Bruce ran over and helped tie-up the spring line so no drama.  I'm going to keep doing this until it's easy....or my boat insurance is cancelled.

Today I am working on projects which include:
1.Tighten head seacock intake to stop a slow drip when it is open.
2.  Remove kenyon alcohol stove from boat and discard it. 
3.  Change the dodger handles from the inside of the dodger to the outside of the dodger to help walk up to the mast.
4.  Measure jib car and order cleats that can be put on it. (I need a cleat to support a mid springline).
5.  Pull out cooking and propane stuff in starboard locker and inspect.
6.  Clean cockpit.  And flush scuppers.
7.  Test manual bilge.
8.  Clean (soak) mainsheets.

I was able to update the chartplotter software on my Garmin yesterday.  It had never been done.

Decisions and upcoming work:
I ordered 2 expensive coolers that claim to keep ice for 10 days.  This is going to be my refrigeration system.  One will go where the stove was and the other inside the built in cooler box that is crap.

My simrad tillerpilot arrived today!!

Things to buy:
Reclining chairs for the cockpit.
Vhf
First aid kit

Work i'd like to pay someone to do:
Paint topside
Remove and sand wood accents on boat.

Ok, there's my data dump out of my head.
Tomorrow, I do projects and then go sail.  Will try to take better pics.

Fact: I met a cool guy here (the s/v Luna Sea) and he told me that he went up the ICW from Florida all the way to Norfolk....and he grounded 21 times!! It's all soft mud so they rocked their boat out of it but I think Norfolk to  Beaufort is all the ICW I'm going to do.

Tuesday, 24 September 2019

Stingray Point

I am docked near Stingray Point. It is named this due to the legend that John Smith was stung here by a stingray.  Pocahontas took him to "the river of no poisons" and cured him. History is everywhere in Virginia.

Monday, 23 September 2019

Week 3 - V Lee makes its first sail

So one of the guys here at the marina volunteered to go sailing with me yesterday (he's from Texas).  He's very experienced and he really walked me through everything.  I spent a good bit of time just coiling up lines and clearing paths etc.  before we sailed. 
We motored out of the marina and out to the deep area and then let the mainsail and jib out.  The V Lee sails really well.  The main needs a cleaning, the jib looks like new.  It was great to finally sail her. 
The biggest challenge for me will be doing everything single handed.  Doable...but it needs to be planned.  Docking into a slip will be the most difficult thing, as well as stepping away from the tiller to hoist the mainsail in a heavy blow.
But people do it all the time and I will learn to do it too.

Ok, so my original idea was to buy electronics upgrades when I hit Beaufort....but I was so encouraged by yesterday's sail that I have a new auto tiller, compass, and vhf with ais capability on the way....the auto tiller is required for single hand sailing.
The garmin chartplotter actually works and I am going to spend today learning how to use it.

Tuesday, 17 September 2019

Week 3 - My sail is ok

It was raining today so I haven't gone out for a sail yet.  But I had a knock on my boat this morning and it was Jerry Lattrell of Ullman Sails.  They hoisted my existing sail and told me that it was just fine....made probably in the late 1990s but hardly used at all.  All it needs is a cleaning.  Fantastic News! I still want to buy a backup sail but I can look around on the internet for something suitable that would be cheap.
The dodger is now patched with sail tape and is not attractive but will work for a while.  Jerry said the shops here in Deltaville are so busy that they wouldn't be able to make me a new one until spring. 
Today I also took the Bimini out...it looks new.  So, a good day for the VLee