Thursday, 26 September 2019

Week 4 - projects and trial and error

Yesterday I single handed for the first time (that sounds so dirty). I got off to a rough start out of the slip, I made an exit plan, untied the lines in the proper order and then got back in the cockpit to go in reverse. But the current and wind pushed the bow of my boat to starboard and I came within 2 inches of hitting (hard!) a replica of a famous fishing boat from the 1920s (list price $89,000). But I pushed it away with my foot at the last second and my heart stopped beating while my anchor and bow sprit passed by the antique glass accents and brass trim.
I quickly got VLee out into the open area and turned her around and got out of the marina.  In the future I am going to drop anchor away from marinas a lot more than I do now.

Once I was in open water everything was fine. Wind was light. I practiced leaving the cockpit and hoisting the mainsail by myself...a bit scary but I did it.    The return to the marina went much better.  I had a docking plan and for the most part it worked - also my friend Bruce ran over and helped tie-up the spring line so no drama.  I'm going to keep doing this until it's easy....or my boat insurance is cancelled.

Today I am working on projects which include:
1.Tighten head seacock intake to stop a slow drip when it is open.
2.  Remove kenyon alcohol stove from boat and discard it. 
3.  Change the dodger handles from the inside of the dodger to the outside of the dodger to help walk up to the mast.
4.  Measure jib car and order cleats that can be put on it. (I need a cleat to support a mid springline).
5.  Pull out cooking and propane stuff in starboard locker and inspect.
6.  Clean cockpit.  And flush scuppers.
7.  Test manual bilge.
8.  Clean (soak) mainsheets.

I was able to update the chartplotter software on my Garmin yesterday.  It had never been done.

Decisions and upcoming work:
I ordered 2 expensive coolers that claim to keep ice for 10 days.  This is going to be my refrigeration system.  One will go where the stove was and the other inside the built in cooler box that is crap.

My simrad tillerpilot arrived today!!

Things to buy:
Reclining chairs for the cockpit.
Vhf
First aid kit

Work i'd like to pay someone to do:
Paint topside
Remove and sand wood accents on boat.

Ok, there's my data dump out of my head.
Tomorrow, I do projects and then go sail.  Will try to take better pics.

Fact: I met a cool guy here (the s/v Luna Sea) and he told me that he went up the ICW from Florida all the way to Norfolk....and he grounded 21 times!! It's all soft mud so they rocked their boat out of it but I think Norfolk to  Beaufort is all the ICW I'm going to do.

Tuesday, 24 September 2019

Stingray Point

I am docked near Stingray Point. It is named this due to the legend that John Smith was stung here by a stingray.  Pocahontas took him to "the river of no poisons" and cured him. History is everywhere in Virginia.

Monday, 23 September 2019

Week 3 - V Lee makes its first sail

So one of the guys here at the marina volunteered to go sailing with me yesterday (he's from Texas).  He's very experienced and he really walked me through everything.  I spent a good bit of time just coiling up lines and clearing paths etc.  before we sailed. 
We motored out of the marina and out to the deep area and then let the mainsail and jib out.  The V Lee sails really well.  The main needs a cleaning, the jib looks like new.  It was great to finally sail her. 
The biggest challenge for me will be doing everything single handed.  Doable...but it needs to be planned.  Docking into a slip will be the most difficult thing, as well as stepping away from the tiller to hoist the mainsail in a heavy blow.
But people do it all the time and I will learn to do it too.

Ok, so my original idea was to buy electronics upgrades when I hit Beaufort....but I was so encouraged by yesterday's sail that I have a new auto tiller, compass, and vhf with ais capability on the way....the auto tiller is required for single hand sailing.
The garmin chartplotter actually works and I am going to spend today learning how to use it.

Tuesday, 17 September 2019

Week 3 - My sail is ok

It was raining today so I haven't gone out for a sail yet.  But I had a knock on my boat this morning and it was Jerry Lattrell of Ullman Sails.  They hoisted my existing sail and told me that it was just fine....made probably in the late 1990s but hardly used at all.  All it needs is a cleaning.  Fantastic News! I still want to buy a backup sail but I can look around on the internet for something suitable that would be cheap.
The dodger is now patched with sail tape and is not attractive but will work for a while.  Jerry said the shops here in Deltaville are so busy that they wouldn't be able to make me a new one until spring. 
Today I also took the Bimini out...it looks new.  So, a good day for the VLee

Monday, 16 September 2019

Week 3 - a bit of this, a bit of that

So the last few days I've been ridding this boat of 30 years of junk.  There must be 40 rolls of tape and 200 batteries....from the 1980s.  I'm about done.  On the plus side, I have discovered a pair of offshore marine binoculars, bosun chair, jack lines, and a ton of boat hardware. It has been so hot here the past 2 days, but it  has been a nice chance to get to know my neighbors a bit and make plans for what I want to do. 

I wish I had the guys at Yankee Point paint the topside of my boat....it really needs it.  I'd do it now but then I'd have to pull it out of the water again.  I'm thinking about that one 

Tomorrow, no cleaning - I sail! 

I have to tell you that here are these people around me in multi-million dollar yachts and they are as friendly as they can be.  I mean my boat looks like a piece of crap compared to what they have but that doesn't mean anything here....it's about the adventure and the experience, not what you have. That being said, I noticed that most of the people with the biggest boats don't ever seem to go out in them...they stay put.  But then again, if my boat cost 3 million dollars, I'd stay in it too. The people in an incredible trimaran were talking about going to Tangiers next week. I think most others are just waiting for hurricane season to end.

My project list is quite long....I still need to buy a new sail.  And an auto tiller.   And some kind of air con unit for a 30 amp boat.  And the dodger needs some repair (I think I"m going to do it and just replace it next year). And a refrigerator/freezer combo.  But mostly, the boat just needs a good scrubbing and the rebed project. Lots to do.

Finally, we have just been joined by a boat that is in the same league as mine (I'm not alone!)..Thank you s/v Luna Sea from North Carolina. Of course, it's bigger and nicer than mine, but in my "sphere".

P.S. - for those of you who watch sailing videos on YouTube - I have not seen one young guy with his super model girlfriend in a leopard bikini here.....mostly retirees.


Friday, 13 September 2019

Week 2 - LAUNCH DAY

So much happened today that I don't know where to begin, but here goes:
Last night the rains came.  This was good because it allowed me to see what leaks on the boat.  A couple of the port lights need to be resealed and the large hatch needs to be rebedded. This isn't as bad as I had heard from the marina manager so, one of my projects already was to rebed the stanchions so I'll just do the port lights while I'm at it.
Anyway, I wasn't sure I was going to launch today due to the bad weather.  The rain was light....I decided it was time for the Virginia Lee to get off the blocks and get in the water.  So, we launched.

Once I was in water I could test some things that I couldn't before.  I had 2 surprises:  The automatic bildge pump works great!  Also, I have a knotmeter!  It's part of a Tridata device that tells you the depth, speed and distance you are going.  The depthmeter worked pretty well...it's great to see as you are going over the water how deep it is below you......more on this later.

Navionics was a bit of a disappointment on my maiden voyage....the maps are great but the location "dot" that tells you where you are is a bit slow.  I found Google Maps to be almost as helpful.

So I didn't sail today....good decision.  the water was great and the Raphannock River is a great boating location that no one uses.  I don't know why....I only saw 4 other boats on water during my 5 hour trip to Deltaville.

But....the closer I got to the Chesapeake....the windier and choppier it got.  My last hour was really rough....until......

The marina I'm at has a narrow channel into Broad Creek.....I was so happy to see the end of my journey....until I misread the markers and grounded my boat on the very first day. Yep, grounded it.  I was speaking to the marna on VHF and they called USBoat Tow who said they didn't think they could "get out there" tonight.  The Coast Guard also was contacted and they did call me but their job is to make sure that US Boat Tow does their job.  The USCG started asking me questions like "do you need medication that you don't have on board" and "do you have water"....obviously they thought I'd be aground for the night.  But then, as I've already seen so many times... boat people are the best.  2 guys on a jet ski came to my boat, released the halyard from the tie up and connected it to the jet ski.  Then we essentially tumped my boat over on its side to pull the keel out of the sand and then the jet ski was able to pull me out of the sand.  The guys (Wayne and Greg) were awesome, then when I got to the marina, of course many people had observed the festivities and were incredibly helpful tying up the boat, comforting me (everyone of them said that they have been aground many times etc....) so a dramatic finish to launch day turned out to be a good chance to meet new people.

The marina I am at is fantastic.....wonderful facilities, beautiful views, etc. it is in Deltaville.  They also have 3 cars we can use.  I think I am going to stay here one month and continue to work on the boat and when the weather settles down....go out and practice sailing. As my Dutch friend Ilyur (Elyur?) said...." It's still hurrican season, why are you in a hurry to go out in it!  Practice, learn, listen....then go."  (It should be noted that Ilyur doesn't like the Carribean).

The weather is windy and the water still choppy tonight.  I have pics and will try to post some later.



Week 2 - the 2 days before launch

So these two days were so hot in Virginia that I couldn't sleep at all.  I was sleeping in my boat "on the hard" and it was unbearable.  But the day before launch I had to drive my rental car back to Richmond Airport and then take an uber back to the boat ($88). 

One cool thing that happened was that I met a Dutch guy named Ilyur, (Elyur?) who just put his boat on the hard at Yankee Point for 6 months.  This guy is a sailor...he and his wife have lived on their boat since 1991.  He is a super nice guy and gave me several maps and charts. He also tried very hard to talk me out of going South too quickly....it is true that Chesapeake Bay and the rivers that pour into it are a sailing paradise as long as the weather is good.  I keep meeting Dutch people....they are born sailors and love to cross over to North America.

The only other thing of note was a lucky break where I was going through the engine checklist and noticed that the hose that pulls water from a through hull into the engine to cool it wasn't connected. I'm pretty sure that I didn't touch it so lucky that I found it and connected it back before I melted the engine. 


Tuesday, 10 September 2019

Week 2 - getting things done

Seacocks are now free....i took them apart and just tapped on them until the valve piece popped out.  Not as difficult as I thought it would be.
The water tank was a full day of work.  I replaced the copper tubing with pvc pipe then poured 2 gallons of bleach in it then filled it up. Then I pumped the bleach mixture through the water lines....you would not believe all the crap that was in the water lines (there was also a dirt dobber nest in one of the seacocks).
Anyway it is all cleaned out.  Bleach mixture now drained and tank filled with water.
Today I installed the dodger on the boat.  It's in decent shape but I will probably replace it next year.
The next project is to pull out all of the crap stuffed in the boat drawers and see what is useful and what is not.  Then I get on water. 

Saturday, 7 September 2019

Week 2 - moving aboard the boat

So today I move aboard the boat while it's still "on the hard" (on land). I'm blowing too much $$ on hotels and wasting too much time driving back and forth.  I wanted to be on the water now but I still have 2 frozen seacocks and I want to spend a few more days trying to unfreeze them. 
So the marina owner is letting me stay on the boat with elect and water hookups while I work through a few other smaller projects that are more easily done on land.
Next weekend at the latest....i launch.

Wednesday, 4 September 2019

Week 1 - Hurricane Dorian delays my first sail and I get some work done



Things I wanted to accomplish this week:
1.  Unfreeze the 2 remaining seacocks.
2.  Ospho and Paint the Anchor locker Chain Plate
3.  Pull out the 24 gallon vberth water tank and clean it out (copper corrosion)
4.  Sail or Motor out to the Raphannock River on September 6th

1.  I have pulled the hoses off the 2 seacocks and sprayed half a can of PBBlaster into them but they still won't budge.  I can't work on them while the boat is in the water, so I am running out of time.  It's ok if they are frozen open, but you run a risk of having a hose slide off and sinking your boat without anyway to plug the through hull.  I'm going to try one more time on Friday....then I will be stuck with them open until I pull the boat out again.

2.  Completed!  I used sprayed 2 coats of Ospho on the chainplate and then painted it with Awlgrip.

3.  I really didn't want to pull this tank out.  I had read on the internet that you had to pull the door trim off in order to get the tank out of the cabin.  The copper tubing that was used to pull water from the tank was corroded to the point where it was in 2 pieces.  So, last night I started wondering if I could pull the copper tube out of the water then use a pump to pump out the water.  This way I wouldn't have to remove the tank at all (It's a good tank, no leaks, very well built).  So, today I went to Lowe's and bought a $20 hand pump, and a pair of needle nosed pliers and everything worked great.  I got the tubing out of the tank, and then the hand pump worked great and I was able to pump all of the crappy water out that had been sitting there for years, then fill it with clean water again and then pump that out.  Next trip, I pour a gallon of bleach in there, fill to the top of the tank, pump it out a day or two later.  Then baking soda.  It may be a while before I use that water as drinking water but it will be ok for showers, sinks, etc.   Great success here...so glad I don't have to remove it.

4.  Hurricane Dorian has delayed my sailing plans.  It is supposed to have minimal impact to Virginia except for rain and strong winds on Friday morning.  I plan to leave Saturday morning.  Keep you posted.

Sailing School and finally seeing my boat

So, I'm not going to say much about My 5 day keelboat course taken at JWorld in Annapolis, Maryland because I've already told everyone I know about it, but it was a great experience....exhausting, painful, draining....and a lot of fun.  I was amazed that I didn't get sea sick at all.  Then it was off to the boat.  I had 3 projects I wanted to get started on while in Virginia working on my boat:
1.  All 6 through hull seacocks were frozen open.  Need to unfreeze them. 
2.  The anchor locker chainplate had a chunk of it rusted out and needed to be coated with Ospho (a chemical that turns rust back into iron) and then painted with a polyurethane paint to stop any further deterioration.
3.  Inspect the standing rigging.
4.  Vberth water tank had issues (see future posts). 

So, I did get 4 seacocks unstuck...I thought I had unfrozen a 5th but it only moved a little then quit moving.  So 2 seacocks left to deal with.  Also, I got a wire brush and brushed the rust off of the chainplate but that is all I did.  I did look at the standing rigging and found it to be in good shape.
Back to Saudi....... 

Buying the Boat

OK, so I'm going back to the beginning....
10 months ago, while I was working in Saudi Arabia I started seriously focusing on what I was going to do when I retired from working in KSA and returned to the U.S.  I had been kicking around options for years but it always came down to:
1.  Buy an RV and live in it.
2.  Buy something in Turkey and live there.
3.  Buy a sailboat
4.  Numerous other options that never made it into the top 3

The RV option was an easy option - buy the RV, put gas in it and go.  But I want to be active and pushed to do something physical.  RV'ing has those options (hiking trails, etc.) but I know I'd just stay in the RV and watch TV.  Also, my own perception is that older RV people never look happy....I wanted to be around positive people.

Buy an apartment in Turkey:  very tempting given how cheap housing is and what a great country it is but the language barrier would always be a problem and it's far away from family.

So, Sailboat is what I have been thinking about for years but I thought it would be too expensive to do on the money I had....this turned out not to be true so far.  This became my obsession the past 12 months and 8 months ago I bought a 1977 Cape Dory 28 ft. sloop. 

I was in Saudi but started surfing the internet for the boat I wanted.  My criteria was simple:
1.  Capable of blue water cruising. 
2.  Not too big because most of my sailing will be single handed.
3.  Good reputation
4.  No major deficiencies: blistering, soft "delam" spots, engine in good shape.

I decided I wanted a Cape Dory (I like the way they look, and because I wanted a tiller, I decided to focus on a 28 ft. model.)

There were quite a few on the market varying prices, but one day on the Cape Dory User Group site I caught one small ad from a guy selling a Cape Dory 28, contacted him and the rest is history.