Friday, 13 December 2019

Repair, Reflection and the Liveaboard Transient life

So tonight it's raining and cold and I'm sitting here in the VLee nursing a Sam Adams 76.  This week the stern pulpit was welded and I installed it back on the boat.  My sail should be ready in a few days.  The navigation/communication/safety electronics I want to install on the boat have all been received and I'll be working on that next week.

So I've been doing some reflection on my "adventure" that began officially on September 1st.  I'm laughing at myself for thinking that I'd be in Florida (Key West!) by the middle of October.  HA!  My boat is full of bright summer clothes, crocs, and shorts. 
What happened? 
So I learned to sail in May (basic skills) and I am ready to continue to practice and enjoy this wonderful sport.  But, what I did not take into account was the huge learning curve that being a liveaboard transient boater (single hander) requires.  Not just sailing, but mechanics, systems, seamanship and just learning about my boat and how it handles.  There is all kinds of stuff about this on the internet.  Wish I'd read it before I started this!  Most people agree that it takes a full year.  In my 3.5 months, I have made quite a few mistakes which in the boating world always lead to expenses and repairs.  But, I have learned a lot in the past few months...to the point that no one I used to know understands what I am saying anymore.  The problem is, there is no other way to learn. I left Yankee Point Marina in September not knowing anything about my engine, and I'm lucky nothing  happened.  I also knew very little about basic seamanship (boating rules, markers, handling shoaling, and many other things).  So I am definitely having an adventure - just not exactly the one I had in mind in August. 


I still feel like I"m camping on a boat.  I don't have refrigeration and I haven't upgraded the cabin to more comfortable and home like seating.  But, one thing at a time.   The important thing is....I'm still having fun and staying sharp and I've gone down 2 pant sizes without giving that one moment of thought.  

Saturday, 30 November 2019

working on the boat

Nov 30,2019
So I have reached Oriental, NC....a small town of 500 that has over 3000 boats in it.  Parts, service and independent contractors here are reasonable and have good reputations.  So I am taking a work break to do many of the things I listed in my last post.
I'll take my time, get it all done and then head south.  Today I took my sail off and sent it to a shop for cleaning.  Tomorrow I will take the pulpit off and take it to the welder on Monday. There are only 2 liveaboards at my marina right now....they gave me a set of keys to the courtesy van so I can come and go as I please. The big decision today is....do I paint the deck? If I do, do I take the toe rails off and have them varnished before I paint or paint around them?  Paint and woodwork are the worst jobs ahead of me.  

Friday, 22 November 2019

Engine Fixed, ICW Journey Begins, Asshole boaters, Boarded by USCG, Motoring,Boat Upgrades and Cinnamon Coke

November 22, 2019 (this is a long one)
So 3 days ago I left Chesapeake, VA after paying an over inflated bill.  The best thing I can say about it was that the mechanic I had was very good and showed me a few things. I however, did as much work as he did so that I could get out of there.  Despite what they say, Big dollar boats owned by Big dollar people with Big dollar repairs are always going to get priority.  I must have done a good job reinstalling the mixing elbow and manifold riser because the mechanic asked me if I needed a job...

My journey to Coinjock, NC was uneventful.  It was about 6 hours long and was fine except I was part of a large convoy of boats to get out of Virginia and go south.  The big speedboats flew by my sailboat brethren (none of us were sailing because the North River started looking like the North Sea) and the wake of some of these boats was tremendous.  I started experimenting with what to do when they came along side of me at "ludicrous speed".  Eventually I found something that worked: as soon as they clear your bow, get directly behind them.
Coinjock was a cool small town.  Next morning I knew I had a long journey of about 7 hours. I got off to a great start as part of the continuing convoy of boats until we all started getting boarded by the USCG (United States Coast Guard).  They were cool but  because one of my fire extinguishers was no longer charged (I should have checked that but never did) I was sent back to Coinjock to buy one at the marina.  I did, and left 90 minutes later than planned.  They didn't fine me or anything, actually they provide a good service in educating you about what you need on board and how to use them. Just wish it had been another day.  This forced me to go Max Speed the whole trip across the Albemarle Sound to the Alligator River.  The engine was great...not one drop of water or diesel leaked out of it. 
The Ablemarle Sound was pretty, but I was surprised by the floating logs and trees and crab pots in the channel.  It required my full attention but I admit it made it kind of fun. A few friends have asked why I am not sailing this trip.  My answer has several components: Wind, tacking, and needing to be at a marina before dark.  For example, when I finally hit the Sound, I planned to sail a bit.  But what happened?  The wind turned to the South West....the direction I was going.  Could I tack?  No way, the channel is narrow and the sound has floating debris so it wasn't an option.  Also, these first 3 legs require a full day of boating with no other marinas between locations.  I could drop anchor, but.....more about that later in this post.
Anyway, today I am kicking back and relaxing at the Alligator River Marina because the wind is gusting up to 35 knots.  Tomorrow is better.
Tomorrow is the longest leg of my trip to Beaufort...8 hours of boating.  I need to be in the Belhaven area before dark. 
Ok, so I've missed things since being in KSA....I didn't know there was such a thing as Cinnamon Coke!  It's awesome!!  If they'd make a diet version I'd buy it by the case. 

Reflections on Future:
As some of you know, my plan all along has been to get to Beaufort and then if I decide my boat is worthy of upgrades and if it was,  I'd get somewhere and make them.  The boat is rock solid and I feel like it's had a good test already.  So now the question is: Where do I stop and make the upgrades?  The cheapest place to spend winter and do this is Oriental, NC. I wanted to go further south but I need to consider that I am a newbie functioning with basic boating tools so my safety is an issue.....I need:
1.  Electronics Upgrades (all I have right now is Navionics on my phone).  I need (want) new Depthmeter and Sonar capability. and a chartplotter that runs off of boat DC current.
2.  New Anchor Rode and equipment to support dropping anchor (light, anchor buoy etc.) My current anchor system is as basic as it gets - 10 ft. chain, 170 ft. old rope and a spade anchor.  That is it. 
3. VHF - I haven't even read how to do all of the functionality it has.  I also want to connect a AIS router to it that will allow the AIS (ship) data to be seen on Navionics or new chartplotter.  This will allow me to see commercial vessels around me and hail them that I am in their path. I also want to move it outside to the cockpit so I can actually hear it.  I have a handheld vhf but it isn't as powerful.
4.  I need to make a new Dodger.  Mine is old, torn, and I think rotted.  My bimini is in great shape. 
5.  Have a welder fix the damage to my pulpit that the tow caused.
6.  Install the Autotiller that I bought.

This is just the stuff to help me single hand the boat.  I also need cosmetic things like painting the top side and deck, sanding and refinishing the teak, and make the cockpit more comfortable for long trips. 

SOOOO......do I stop and work on this stuff and go to Florida more safely and with better navigation and boating aids?  Or go to Florida with what I have and pay more?  Giving it all some thought.......
Another appeal to Oriental is that there are lots of sailing businesses an marine repair shops etc.  and when the weather is nice, I can go sailing for the day and improve my skills while I work on the boat.  But, it will be cold.  I can stay there for $350 per month in floating dock wetslip, or I can go down to Beaufort and pull it out of the water and live in it for the same amount of money. 

Final reflections:
I really am enjoying living in the boat (especially now that I don't smell Diesel fuel and exhaust anymore) and I like marinas and all the boat folks I have met.  I sleep very well in my boat.  When I'm sailing in it or motoring it....It's fun, horrible, exciting, stressful, serene and exhausting all in one afternoon.  Now that my engine is sorted out, I can finally worry less about that and more about the things that I want to do.

On to Belhaven! I will have a cinnamon Coke for all of you!


















Monday, 11 November 2019

Week 10 - shipyard engine check, plans, and icw

So Saturday I left Portsmouth and went down the normal (Virginia Cut) icw path. It would have been really fun (I got to hail my first bridgetender and go through my first lock) but given recent boat history I spent the entire 12 mile trip looking at where I would tie up if the boat died....but we made it fine.
The lock was cool but difficult for single handers.  I had to pull up to the wall and throw bow and stern lines up around a cleat above my head. Then they instructed us not to tie up but to just hold the lines.  Then they filled the lock and we went up a few feet.  Then we all filed out of the lock.
So now, I am at a highly regarded shipyard waiting for 3 items to be addressed: engine water leaks, diesel leak, and I think...a new battery.  As soon as they get this done I'm back on the water and on my way to NC.
No dismal swamp this time.
If I can't make it to Florida I may settle for a much cheaper South Carolina but let's see how it goes.

Wednesday, 6 November 2019

Week 9 - change of plans

Well, I'm still in Portsmouth, Va.  I was all set to leave on Tuesday morning when I heard a very faint alarm sound. It wasn't the alarm I would usually hear if something were seriously wrong, I could barely hear it.  But after my adventure in Norfolk I didn't want to chance it.  So then I decided to get a boat electrician to look at it.  Today I tested it and it was gone...but I don't know much about my electrical systems so the electrician is coming tomorrow just to do a routine service check and show me what I need to know. 
This is what I expected would be happening....there's no way to know what needs to be fixed until you get out there and see what happens. Anyway, this will be a good opportunity to see what I need to know about my alternator, various regulators, batteries etc.
I'm in no hurry to leave except for the fact that it is getting cold here.  I naively thought I'd be in Florida by now.  Most of the boats here at the marina have repair issues and are waiting for parts....I have gotten some great advice from the old salts here and they have told me:
Don't do the dismal swamp....it's too shallow and difficult for a single hander to navigate out of shoal areas.  Everyone is telling me this.  So, I may just do the conventional icw.
If I do this, that means I will have an 8-9 hour boat ride to Coinjock, NC. That is a long haul. I prefer not to do more than 5 hours in a day.but there is no where else to stop until I get there.

I asked an older woman in, I would guess, her late 60s if she needed a push off from the dock.  She was single handing a bigger boat than mine.  She sweetly told me no, then pulled out of her slip and drove off.  The secret to single handing is to have a mid cleat (spring line).  It keeps you from having to worry about the bow swinging out. That's what she had and she obviously knew what she was doing.

Next stop...Coinjock.

Wednesday, 30 October 2019

Week 8 - disaster! Or was it....

Lots to report this week.  I should say that I created this blog mostly for myself at the suggestion of a cape Dory owner who said I should list all of the work I have done so that when I get depressed about the never ending boat work can look back and see all I did. 

So, on Monday I decided to leave the excellent Salt Ponds Marina for Portsmouth's Tidewater Marina....a big marina on the icw and next to Portsmouth's olde Town. 

I never made it....

As I left the salt ponds I immediately noticed the huge 3-4 ft swells slamming my boat as I entered the Bay.  It was rough.  I persevered and made it all the way to the Norfolk shipping channel....I thought I'd get some cover here but then the wind changed directly East and the rough seas continued.  Then it happened....my alarm went off and the engine was smoking a bit from overheating...Fuck!  I shut the engine off and tried to sail through the channel with my jib sail...too rough!  Then I heard it .....BOOM BOOM BOOM BOOM BOOM....I looked behind me and there was a container ship on my ass.....then I heard a foreign voice on vhf channel 16 telling me to clear the channel.....I stood up and told him to Fuck Off (and shot the finger at him)...I was powerless and he needed to move his ass around me.  He did....and sent enough wake to capsize my boat.  Asshole!
So I called the coast guard who sent the Hampton volunteer fire Dept to me to tow me in.  They were nice, but inexperienced.  I had to come up to the bow to cleat them to my boat.  During the tow they bent my anchor cotter pin frame so much that the anchor fell off the deck.  I grabbed it with my right hand while holding on to the boat with my left.  I gashed the hell out of a finger but managed to pull my anchor up on deck.  Then the tow rope busted my  deck light. 
Then as we arrived at the closest marina (old point Comfort) they cut a corner too close and my stern stanchion didn't clear the entrance and they bent the shit out of it (while looking right at it). 
The thing is...they were volunteers providing a free service...I wanted to beat the crap out of them but I really couldn't...it was free....I was happy to be out of the channel.  I just said thanks and let them go. 
Their captain had the best line of the day...he said "I saw you bouncing around out there.....if you didn't vomit during that (I didnt) you are never going to."

So, I found the problem that caused the engine to overheat.  I have ordered parts that will be here in 2 days.  The problem was mentioned in my survey done last Feb. But I forgot about it (can I win 2 Darwin awards?). I'll do the repairs and be off on Monday if all goes well.

This event caused me to ponder if I'm doing the right thing...if this is too much for me to handle....if I am too old for this.  But after I was docked at the marina and given a double shot of tequila by one boater and comforted and reassured by 3 other boaters I realized.....how much fun I just had.  This is what I wanted.  To test myself physically and mentally.  To do things I have never done before and learn about boating and sailing and be with like minded people.  That tequila shot represented brotherhood, respect and acceptance.  I am more determined than ever to move forward and do this...because at the end of the day....the whole afternoon was a blast and I don't have to be anywhere at a certain time. 

I am happy to report that I have fixed the anchor and deck light and ordered parts to fix the engine.  I'll find a fix to the stern stanchion.....I don't have to fix it today.  Instead, I went to harbor freight tool store ...I could shop there for a week.  Bought boat tools and then went to LaParilla and drank 4 margaritas.   Life is good.....

Sunday, 20 October 2019

Week 7 - Rain, "effluent", and leaving early

So I went to Texas for my mother's funeral service and got back to Norfolk yesterday.  It has been raining ever since I arrived.  In fact it is projected to rain 8 of the next 10 days here and it is starting to get a bit chilly at night.  This of course means that it is time to get my rear end out of here and go South.

The following items MUST be done before I can leave:
1.  Topside of boat needs to be cleaned and waxed with my Delaware registration put on the boat.
2.  Transom needs to have "Sandpiper" scraped off, cleaned, waxed and "VLee" decal put on. (1 and 2 are required by uscg).
3. Vberth starboard Port needs to be rebed.
4.  Holding tank needs a pump out and I am never using it again - this requires an explanation...

I've used my jabsco toilet on board about 6 or 7 times in the past month.  I checked the tank and noticed that it didn't appear that anything was in it.  I wasn't sure why. Without going into detail air pressure was keeping the waste from going into the tank so I opened the deck fitting and drilled a hole at the top of the tank (stupid! I deserve a Darwin award for that).  So I go back and check and the tank is now completely full...with a smell that cannot be described.  I am not going to deal with pump outs at marinas.  It's too much trouble. So I will pump this out tomorrow at the fuel dock, run vinegar through the lines, flush biohazard freshener into the tank and never use it again. 
Instead, I will put a plastic bag in the bowl, tie the bag, and then dump it in the trash.  This is easier to deal with. 
Once I am 3 miles away from the coast I can legally pump the poop into the ocean, so the bag process is only for coastal sailing. 
Come to think of it I haven't seen anyone do a pump out at this marina....they must have huge tanks.
I also bought one of those kids pool toys that is the long foam pole...made a toilet cushion out of it....if I have to use a bag I can at least be comfortable.

Anyway.....I'm going to do all of this on the 2 good weather days we have and then I am leaving.  I am taking the ICW
to Beaufort.  I am going to cut it into 4 day trips....more about that next post....
P.S. previous owners left me a marine grade heater...works great!

Thursday, 10 October 2019

Week 6 - sailing, sons visit, preparing for the first legs of my journey

During the past 2 weeks a lot has happened.  My oldest son came to visit for a week and we had a great time.  He picked up sailing terminology really fast.  Then came the sad news that my boat's namesake (my mother) passed away....I don't even have her name on the boat yet, but I'll do it soon.

As far as the VLee is concerned, I'm happy to report that all of the tasks I set out to do in my last post have been done except I didn't soak the main sheets....it can wait.  But with a boat there is always more to do and we finally had some rain.  I rebed the stanchion that was mentioned in my survey as  problem before it rained and it worked great - no leaks.  But i discovered that most of my ports (windows) have small leaks inside due to old gaskets.  So, tomorrow I replace the gaskets (shouldn't be a hard job).  One of the ports may need to be rebed from the outside and the forward hatch is leaking from the outside so it needs some attention too.  All boats leak (this was the discussion of the day the following day here at the marina). But, I am determined to have a dry cabin. 

Today I filled up the water tank and my new 7 gallon water cans and attached them to the bow of the boat. Tomorrow I fuel up with Diesel and finish the gasket project.  Then, on Saturday I leave the friendly people of Deltaville and begin moving South.  I hope to be in Norfolk by Monday. Winds are predicted to be light and out of the south for most of the journey which means I'll be beating directly into them but as light as they are it won't be an issue.

Two upcoming projects:
build a piece that will fill the V berth so that the entire berth is one big bed.  So right now it looks like an upside down "V" and I want it to look like a triangle. Not difficult, just need to make time.

Connect my vhf radio AIS capability to my chart plotter so that my plotter sees where other boats are and what their path is.  I have this capability on the radio but having it on the plotter would be awesome.

On a final note, I have to say that I really like the State of Virginia.  Wonderful food, nice friendly people, thick forests.....nice place. 

Thursday, 26 September 2019

Week 4 - projects and trial and error

Yesterday I single handed for the first time (that sounds so dirty). I got off to a rough start out of the slip, I made an exit plan, untied the lines in the proper order and then got back in the cockpit to go in reverse. But the current and wind pushed the bow of my boat to starboard and I came within 2 inches of hitting (hard!) a replica of a famous fishing boat from the 1920s (list price $89,000). But I pushed it away with my foot at the last second and my heart stopped beating while my anchor and bow sprit passed by the antique glass accents and brass trim.
I quickly got VLee out into the open area and turned her around and got out of the marina.  In the future I am going to drop anchor away from marinas a lot more than I do now.

Once I was in open water everything was fine. Wind was light. I practiced leaving the cockpit and hoisting the mainsail by myself...a bit scary but I did it.    The return to the marina went much better.  I had a docking plan and for the most part it worked - also my friend Bruce ran over and helped tie-up the spring line so no drama.  I'm going to keep doing this until it's easy....or my boat insurance is cancelled.

Today I am working on projects which include:
1.Tighten head seacock intake to stop a slow drip when it is open.
2.  Remove kenyon alcohol stove from boat and discard it. 
3.  Change the dodger handles from the inside of the dodger to the outside of the dodger to help walk up to the mast.
4.  Measure jib car and order cleats that can be put on it. (I need a cleat to support a mid springline).
5.  Pull out cooking and propane stuff in starboard locker and inspect.
6.  Clean cockpit.  And flush scuppers.
7.  Test manual bilge.
8.  Clean (soak) mainsheets.

I was able to update the chartplotter software on my Garmin yesterday.  It had never been done.

Decisions and upcoming work:
I ordered 2 expensive coolers that claim to keep ice for 10 days.  This is going to be my refrigeration system.  One will go where the stove was and the other inside the built in cooler box that is crap.

My simrad tillerpilot arrived today!!

Things to buy:
Reclining chairs for the cockpit.
Vhf
First aid kit

Work i'd like to pay someone to do:
Paint topside
Remove and sand wood accents on boat.

Ok, there's my data dump out of my head.
Tomorrow, I do projects and then go sail.  Will try to take better pics.

Fact: I met a cool guy here (the s/v Luna Sea) and he told me that he went up the ICW from Florida all the way to Norfolk....and he grounded 21 times!! It's all soft mud so they rocked their boat out of it but I think Norfolk to  Beaufort is all the ICW I'm going to do.

Tuesday, 24 September 2019

Stingray Point

I am docked near Stingray Point. It is named this due to the legend that John Smith was stung here by a stingray.  Pocahontas took him to "the river of no poisons" and cured him. History is everywhere in Virginia.

Monday, 23 September 2019

Week 3 - V Lee makes its first sail

So one of the guys here at the marina volunteered to go sailing with me yesterday (he's from Texas).  He's very experienced and he really walked me through everything.  I spent a good bit of time just coiling up lines and clearing paths etc.  before we sailed. 
We motored out of the marina and out to the deep area and then let the mainsail and jib out.  The V Lee sails really well.  The main needs a cleaning, the jib looks like new.  It was great to finally sail her. 
The biggest challenge for me will be doing everything single handed.  Doable...but it needs to be planned.  Docking into a slip will be the most difficult thing, as well as stepping away from the tiller to hoist the mainsail in a heavy blow.
But people do it all the time and I will learn to do it too.

Ok, so my original idea was to buy electronics upgrades when I hit Beaufort....but I was so encouraged by yesterday's sail that I have a new auto tiller, compass, and vhf with ais capability on the way....the auto tiller is required for single hand sailing.
The garmin chartplotter actually works and I am going to spend today learning how to use it.

Tuesday, 17 September 2019

Week 3 - My sail is ok

It was raining today so I haven't gone out for a sail yet.  But I had a knock on my boat this morning and it was Jerry Lattrell of Ullman Sails.  They hoisted my existing sail and told me that it was just fine....made probably in the late 1990s but hardly used at all.  All it needs is a cleaning.  Fantastic News! I still want to buy a backup sail but I can look around on the internet for something suitable that would be cheap.
The dodger is now patched with sail tape and is not attractive but will work for a while.  Jerry said the shops here in Deltaville are so busy that they wouldn't be able to make me a new one until spring. 
Today I also took the Bimini out...it looks new.  So, a good day for the VLee

Monday, 16 September 2019

Week 3 - a bit of this, a bit of that

So the last few days I've been ridding this boat of 30 years of junk.  There must be 40 rolls of tape and 200 batteries....from the 1980s.  I'm about done.  On the plus side, I have discovered a pair of offshore marine binoculars, bosun chair, jack lines, and a ton of boat hardware. It has been so hot here the past 2 days, but it  has been a nice chance to get to know my neighbors a bit and make plans for what I want to do. 

I wish I had the guys at Yankee Point paint the topside of my boat....it really needs it.  I'd do it now but then I'd have to pull it out of the water again.  I'm thinking about that one 

Tomorrow, no cleaning - I sail! 

I have to tell you that here are these people around me in multi-million dollar yachts and they are as friendly as they can be.  I mean my boat looks like a piece of crap compared to what they have but that doesn't mean anything here....it's about the adventure and the experience, not what you have. That being said, I noticed that most of the people with the biggest boats don't ever seem to go out in them...they stay put.  But then again, if my boat cost 3 million dollars, I'd stay in it too. The people in an incredible trimaran were talking about going to Tangiers next week. I think most others are just waiting for hurricane season to end.

My project list is quite long....I still need to buy a new sail.  And an auto tiller.   And some kind of air con unit for a 30 amp boat.  And the dodger needs some repair (I think I"m going to do it and just replace it next year). And a refrigerator/freezer combo.  But mostly, the boat just needs a good scrubbing and the rebed project. Lots to do.

Finally, we have just been joined by a boat that is in the same league as mine (I'm not alone!)..Thank you s/v Luna Sea from North Carolina. Of course, it's bigger and nicer than mine, but in my "sphere".

P.S. - for those of you who watch sailing videos on YouTube - I have not seen one young guy with his super model girlfriend in a leopard bikini here.....mostly retirees.


Friday, 13 September 2019

Week 2 - LAUNCH DAY

So much happened today that I don't know where to begin, but here goes:
Last night the rains came.  This was good because it allowed me to see what leaks on the boat.  A couple of the port lights need to be resealed and the large hatch needs to be rebedded. This isn't as bad as I had heard from the marina manager so, one of my projects already was to rebed the stanchions so I'll just do the port lights while I'm at it.
Anyway, I wasn't sure I was going to launch today due to the bad weather.  The rain was light....I decided it was time for the Virginia Lee to get off the blocks and get in the water.  So, we launched.

Once I was in water I could test some things that I couldn't before.  I had 2 surprises:  The automatic bildge pump works great!  Also, I have a knotmeter!  It's part of a Tridata device that tells you the depth, speed and distance you are going.  The depthmeter worked pretty well...it's great to see as you are going over the water how deep it is below you......more on this later.

Navionics was a bit of a disappointment on my maiden voyage....the maps are great but the location "dot" that tells you where you are is a bit slow.  I found Google Maps to be almost as helpful.

So I didn't sail today....good decision.  the water was great and the Raphannock River is a great boating location that no one uses.  I don't know why....I only saw 4 other boats on water during my 5 hour trip to Deltaville.

But....the closer I got to the Chesapeake....the windier and choppier it got.  My last hour was really rough....until......

The marina I'm at has a narrow channel into Broad Creek.....I was so happy to see the end of my journey....until I misread the markers and grounded my boat on the very first day. Yep, grounded it.  I was speaking to the marna on VHF and they called USBoat Tow who said they didn't think they could "get out there" tonight.  The Coast Guard also was contacted and they did call me but their job is to make sure that US Boat Tow does their job.  The USCG started asking me questions like "do you need medication that you don't have on board" and "do you have water"....obviously they thought I'd be aground for the night.  But then, as I've already seen so many times... boat people are the best.  2 guys on a jet ski came to my boat, released the halyard from the tie up and connected it to the jet ski.  Then we essentially tumped my boat over on its side to pull the keel out of the sand and then the jet ski was able to pull me out of the sand.  The guys (Wayne and Greg) were awesome, then when I got to the marina, of course many people had observed the festivities and were incredibly helpful tying up the boat, comforting me (everyone of them said that they have been aground many times etc....) so a dramatic finish to launch day turned out to be a good chance to meet new people.

The marina I am at is fantastic.....wonderful facilities, beautiful views, etc. it is in Deltaville.  They also have 3 cars we can use.  I think I am going to stay here one month and continue to work on the boat and when the weather settles down....go out and practice sailing. As my Dutch friend Ilyur (Elyur?) said...." It's still hurrican season, why are you in a hurry to go out in it!  Practice, learn, listen....then go."  (It should be noted that Ilyur doesn't like the Carribean).

The weather is windy and the water still choppy tonight.  I have pics and will try to post some later.



Week 2 - the 2 days before launch

So these two days were so hot in Virginia that I couldn't sleep at all.  I was sleeping in my boat "on the hard" and it was unbearable.  But the day before launch I had to drive my rental car back to Richmond Airport and then take an uber back to the boat ($88). 

One cool thing that happened was that I met a Dutch guy named Ilyur, (Elyur?) who just put his boat on the hard at Yankee Point for 6 months.  This guy is a sailor...he and his wife have lived on their boat since 1991.  He is a super nice guy and gave me several maps and charts. He also tried very hard to talk me out of going South too quickly....it is true that Chesapeake Bay and the rivers that pour into it are a sailing paradise as long as the weather is good.  I keep meeting Dutch people....they are born sailors and love to cross over to North America.

The only other thing of note was a lucky break where I was going through the engine checklist and noticed that the hose that pulls water from a through hull into the engine to cool it wasn't connected. I'm pretty sure that I didn't touch it so lucky that I found it and connected it back before I melted the engine. 


Tuesday, 10 September 2019

Week 2 - getting things done

Seacocks are now free....i took them apart and just tapped on them until the valve piece popped out.  Not as difficult as I thought it would be.
The water tank was a full day of work.  I replaced the copper tubing with pvc pipe then poured 2 gallons of bleach in it then filled it up. Then I pumped the bleach mixture through the water lines....you would not believe all the crap that was in the water lines (there was also a dirt dobber nest in one of the seacocks).
Anyway it is all cleaned out.  Bleach mixture now drained and tank filled with water.
Today I installed the dodger on the boat.  It's in decent shape but I will probably replace it next year.
The next project is to pull out all of the crap stuffed in the boat drawers and see what is useful and what is not.  Then I get on water. 

Saturday, 7 September 2019

Week 2 - moving aboard the boat

So today I move aboard the boat while it's still "on the hard" (on land). I'm blowing too much $$ on hotels and wasting too much time driving back and forth.  I wanted to be on the water now but I still have 2 frozen seacocks and I want to spend a few more days trying to unfreeze them. 
So the marina owner is letting me stay on the boat with elect and water hookups while I work through a few other smaller projects that are more easily done on land.
Next weekend at the latest....i launch.

Wednesday, 4 September 2019

Week 1 - Hurricane Dorian delays my first sail and I get some work done



Things I wanted to accomplish this week:
1.  Unfreeze the 2 remaining seacocks.
2.  Ospho and Paint the Anchor locker Chain Plate
3.  Pull out the 24 gallon vberth water tank and clean it out (copper corrosion)
4.  Sail or Motor out to the Raphannock River on September 6th

1.  I have pulled the hoses off the 2 seacocks and sprayed half a can of PBBlaster into them but they still won't budge.  I can't work on them while the boat is in the water, so I am running out of time.  It's ok if they are frozen open, but you run a risk of having a hose slide off and sinking your boat without anyway to plug the through hull.  I'm going to try one more time on Friday....then I will be stuck with them open until I pull the boat out again.

2.  Completed!  I used sprayed 2 coats of Ospho on the chainplate and then painted it with Awlgrip.

3.  I really didn't want to pull this tank out.  I had read on the internet that you had to pull the door trim off in order to get the tank out of the cabin.  The copper tubing that was used to pull water from the tank was corroded to the point where it was in 2 pieces.  So, last night I started wondering if I could pull the copper tube out of the water then use a pump to pump out the water.  This way I wouldn't have to remove the tank at all (It's a good tank, no leaks, very well built).  So, today I went to Lowe's and bought a $20 hand pump, and a pair of needle nosed pliers and everything worked great.  I got the tubing out of the tank, and then the hand pump worked great and I was able to pump all of the crappy water out that had been sitting there for years, then fill it with clean water again and then pump that out.  Next trip, I pour a gallon of bleach in there, fill to the top of the tank, pump it out a day or two later.  Then baking soda.  It may be a while before I use that water as drinking water but it will be ok for showers, sinks, etc.   Great success here...so glad I don't have to remove it.

4.  Hurricane Dorian has delayed my sailing plans.  It is supposed to have minimal impact to Virginia except for rain and strong winds on Friday morning.  I plan to leave Saturday morning.  Keep you posted.

Sailing School and finally seeing my boat

So, I'm not going to say much about My 5 day keelboat course taken at JWorld in Annapolis, Maryland because I've already told everyone I know about it, but it was a great experience....exhausting, painful, draining....and a lot of fun.  I was amazed that I didn't get sea sick at all.  Then it was off to the boat.  I had 3 projects I wanted to get started on while in Virginia working on my boat:
1.  All 6 through hull seacocks were frozen open.  Need to unfreeze them. 
2.  The anchor locker chainplate had a chunk of it rusted out and needed to be coated with Ospho (a chemical that turns rust back into iron) and then painted with a polyurethane paint to stop any further deterioration.
3.  Inspect the standing rigging.
4.  Vberth water tank had issues (see future posts). 

So, I did get 4 seacocks unstuck...I thought I had unfrozen a 5th but it only moved a little then quit moving.  So 2 seacocks left to deal with.  Also, I got a wire brush and brushed the rust off of the chainplate but that is all I did.  I did look at the standing rigging and found it to be in good shape.
Back to Saudi....... 

Buying the Boat

OK, so I'm going back to the beginning....
10 months ago, while I was working in Saudi Arabia I started seriously focusing on what I was going to do when I retired from working in KSA and returned to the U.S.  I had been kicking around options for years but it always came down to:
1.  Buy an RV and live in it.
2.  Buy something in Turkey and live there.
3.  Buy a sailboat
4.  Numerous other options that never made it into the top 3

The RV option was an easy option - buy the RV, put gas in it and go.  But I want to be active and pushed to do something physical.  RV'ing has those options (hiking trails, etc.) but I know I'd just stay in the RV and watch TV.  Also, my own perception is that older RV people never look happy....I wanted to be around positive people.

Buy an apartment in Turkey:  very tempting given how cheap housing is and what a great country it is but the language barrier would always be a problem and it's far away from family.

So, Sailboat is what I have been thinking about for years but I thought it would be too expensive to do on the money I had....this turned out not to be true so far.  This became my obsession the past 12 months and 8 months ago I bought a 1977 Cape Dory 28 ft. sloop. 

I was in Saudi but started surfing the internet for the boat I wanted.  My criteria was simple:
1.  Capable of blue water cruising. 
2.  Not too big because most of my sailing will be single handed.
3.  Good reputation
4.  No major deficiencies: blistering, soft "delam" spots, engine in good shape.

I decided I wanted a Cape Dory (I like the way they look, and because I wanted a tiller, I decided to focus on a 28 ft. model.)

There were quite a few on the market varying prices, but one day on the Cape Dory User Group site I caught one small ad from a guy selling a Cape Dory 28, contacted him and the rest is history.